Maple Tree

Author:

Liam R. Howlett

Overview

The Maple Tree is a B-Tree data type which is optimized for storing non-overlapping ranges, including ranges of size 1. The tree was designed to be simple to use and does not require a user written search method. It supports iterating over a range of entries and going to the previous or next entry in a cache-efficient manner. The tree can also be put into an RCU-safe mode of operation which allows reading and writing concurrently. Writers must synchronize on a lock, which can be the default spinlock, or the user can set the lock to an external lock of a different type.

The Maple Tree maintains a small memory footprint and was designed to use modern processor cache efficiently. The majority of the users will be able to use the normal API. An Advanced API exists for more complex scenarios. The most important usage of the Maple Tree is the tracking of the virtual memory areas.

The Maple Tree can store values between 0 and ULONG_MAX. The Maple Tree reserves values with the bottom two bits set to ‘10’ which are below 4096 (ie 2, 6, 10 .. 4094) for internal use. If the entries may use reserved entries then the users can convert the entries using xa_mk_value() and convert them back by calling xa_to_value(). If the user needs to use a reserved value, then the user can convert the value when using the Advanced API, but are blocked by the normal API.

The Maple Tree can also be configured to support searching for a gap of a given size (or larger).

Pre-allocating of nodes is also supported using the Advanced API. This is useful for users who must guarantee a successful store operation within a given code segment when allocating cannot be done. Allocations of nodes are relatively small at around 256 bytes.

Normal API

Start by initialising a maple tree, either with DEFINE_MTREE() for statically allocated maple trees or mt_init() for dynamically allocated ones. A freshly-initialised maple tree contains a NULL pointer for the range 0 - ULONG_MAX. There are currently two types of maple trees supported: the allocation tree and the regular tree. The regular tree has a higher branching factor for internal nodes. The allocation tree has a lower branching factor but allows the user to search for a gap of a given size or larger from either 0 upwards or ULONG_MAX down. An allocation tree can be used by passing in the MT_FLAGS_ALLOC_RANGE flag when initialising the tree.

You can then set entries using mtree_store() or mtree_store_range(). mtree_store() will overwrite any entry with the new entry and return 0 on success or an error code otherwise. mtree_store_range() works in the same way but takes a range. mtree_load() is used to retrieve the entry stored at a given index. You can use mtree_erase() to erase an entire range by only knowing one value within that range, or mtree_store() call with an entry of NULL may be used to partially erase a range or many ranges at once.

If you want to only store a new entry to a range (or index) if that range is currently NULL, you can use mtree_insert_range() or mtree_insert() which return -EEXIST if the range is not empty.

You can search for an entry from an index upwards by using mt_find().

You can walk each entry within a range by calling mt_for_each(). You must provide a temporary variable to store a cursor. If you want to walk each element of the tree then 0 and ULONG_MAX may be used as the range. If the caller is going to hold the lock for the duration of the walk then it is worth looking at the mas_for_each() API in the Advanced API section.

Sometimes it is necessary to ensure the next call to store to a maple tree does not allocate memory, please see Advanced API for this use case.

You can use mtree_dup() to duplicate an entire maple tree. It is a more efficient way than inserting all elements one by one into a new tree.

Finally, you can remove all entries from a maple tree by calling mtree_destroy(). If the maple tree entries are pointers, you may wish to free the entries first.

Allocating Nodes

The allocations are handled by the internal tree code. See Advanced Allocating Nodes for other options.

Locking

You do not have to worry about locking. See Advanced Locking for other options.

The Maple Tree uses RCU and an internal spinlock to synchronise access:

Takes RCU read lock:
Takes ma_lock internally:

If you want to take advantage of the internal lock to protect the data structures that you are storing in the Maple Tree, you can call mtree_lock() before calling mtree_load(), then take a reference count on the object you have found before calling mtree_unlock(). This will prevent stores from removing the object from the tree between looking up the object and incrementing the refcount. You can also use RCU to avoid dereferencing freed memory, but an explanation of that is beyond the scope of this document.

Advanced API

The advanced API offers more flexibility and better performance at the cost of an interface which can be harder to use and has fewer safeguards. You must take care of your own locking while using the advanced API. You can use the ma_lock, RCU or an external lock for protection. You can mix advanced and normal operations on the same array, as long as the locking is compatible. The Normal API is implemented in terms of the advanced API.

The advanced API is based around the ma_state, this is where the ‘mas’ prefix originates. The ma_state struct keeps track of tree operations to make life easier for both internal and external tree users.

Initialising the maple tree is the same as in the Normal API. Please see above.

The maple state keeps track of the range start and end in mas->index and mas->last, respectively.

mas_walk() will walk the tree to the location of mas->index and set the mas->index and mas->last according to the range for the entry.

You can set entries using mas_store(). mas_store() will overwrite any entry with the new entry and return the first existing entry that is overwritten. The range is passed in as members of the maple state: index and last.

You can use mas_erase() to erase an entire range by setting index and last of the maple state to the desired range to erase. This will erase the first range that is found in that range, set the maple state index and last as the range that was erased and return the entry that existed at that location.

You can walk each entry within a range by using mas_for_each(). If you want to walk each element of the tree then 0 and ULONG_MAX may be used as the range. If the lock needs to be periodically dropped, see the locking section mas_pause().

Using a maple state allows mas_next() and mas_prev() to function as if the tree was a linked list. With such a high branching factor the amortized performance penalty is outweighed by cache optimization. mas_next() will return the next entry which occurs after the entry at index. mas_prev() will return the previous entry which occurs before the entry at index.

mas_find() will find the first entry which exists at or above index on the first call, and the next entry from every subsequent calls.

mas_find_rev() will find the first entry which exists at or below the last on the first call, and the previous entry from every subsequent calls.

If the user needs to yield the lock during an operation, then the maple state must be paused using mas_pause().

There are a few extra interfaces provided when using an allocation tree. If you wish to search for a gap within a range, then mas_empty_area() or mas_empty_area_rev() can be used. mas_empty_area() searches for a gap starting at the lowest index given up to the maximum of the range. mas_empty_area_rev() searches for a gap starting at the highest index given and continues downward to the lower bound of the range.

Advanced Allocating Nodes

Allocations are usually handled internally to the tree, however if allocations need to occur before a write occurs then calling mas_expected_entries() will allocate the worst-case number of needed nodes to insert the provided number of ranges. This also causes the tree to enter mass insertion mode. Once insertions are complete calling mas_destroy() on the maple state will free the unused allocations.

Advanced Locking

The maple tree uses a spinlock by default, but external locks can be used for tree updates as well. To use an external lock, the tree must be initialized with the MT_FLAGS_LOCK_EXTERN flag, this is usually done with the MTREE_INIT_EXT() #define, which takes an external lock as an argument.

Functions and structures

Maple tree flags

  • MT_FLAGS_ALLOC_RANGE - Track gaps in this tree

  • MT_FLAGS_USE_RCU - Operate in RCU mode

  • MT_FLAGS_HEIGHT_OFFSET - The position of the tree height in the flags

  • MT_FLAGS_HEIGHT_MASK - The mask for the maple tree height value

  • MT_FLAGS_LOCK_MASK - How the mt_lock is used

  • MT_FLAGS_LOCK_IRQ - Acquired irq-safe

  • MT_FLAGS_LOCK_BH - Acquired bh-safe

  • MT_FLAGS_LOCK_EXTERN - mt_lock is not used

MAPLE_HEIGHT_MAX The largest height that can be stored

MTREE_INIT

MTREE_INIT (name, __flags)

Initialize a maple tree

Parameters

name

The maple tree name

__flags

The maple tree flags

MTREE_INIT_EXT

MTREE_INIT_EXT (name, __flags, __lock)

Initialize a maple tree with an external lock.

Parameters

name

The tree name

__flags

The maple tree flags

__lock

The external lock

bool mtree_empty(const struct maple_tree *mt)

Determine if a tree has any present entries.

Parameters

const struct maple_tree *mt

Maple Tree.

Context

Any context.

Return

true if the tree contains only NULL pointers.

void mas_reset(struct ma_state *mas)

Reset a Maple Tree operation state.

Parameters

struct ma_state *mas

Maple Tree operation state.

Description

Resets the error or walk state of the mas so future walks of the array will start from the root. Use this if you have dropped the lock and want to reuse the ma_state.

Context

Any context.

mas_for_each

mas_for_each (__mas, __entry, __max)

Iterate over a range of the maple tree.

Parameters

__mas

Maple Tree operation state (maple_state)

__entry

Entry retrieved from the tree

__max

maximum index to retrieve from the tree

Description

When returned, mas->index and mas->last will hold the entire range for the entry.

Note

may return the zero entry.

void __mas_set_range(struct ma_state *mas, unsigned long start, unsigned long last)

Set up Maple Tree operation state to a sub-range of the current location.

Parameters

struct ma_state *mas

Maple Tree operation state.

unsigned long start

New start of range in the Maple Tree.

unsigned long last

New end of range in the Maple Tree.

Description

set the internal maple state values to a sub-range. Please use mas_set_range() if you do not know where you are in the tree.

void mas_set_range(struct ma_state *mas, unsigned long start, unsigned long last)

Set up Maple Tree operation state for a different index.

Parameters

struct ma_state *mas

Maple Tree operation state.

unsigned long start

New start of range in the Maple Tree.

unsigned long last

New end of range in the Maple Tree.

Description

Move the operation state to refer to a different range. This will have the effect of starting a walk from the top; see mas_next() to move to an adjacent index.

void mas_set(struct ma_state *mas, unsigned long index)

Set up Maple Tree operation state for a different index.

Parameters

struct ma_state *mas

Maple Tree operation state.

unsigned long index

New index into the Maple Tree.

Description

Move the operation state to refer to a different index. This will have the effect of starting a walk from the top; see mas_next() to move to an adjacent index.

void mt_init_flags(struct maple_tree *mt, unsigned int flags)

Initialise an empty maple tree with flags.

Parameters

struct maple_tree *mt

Maple Tree

unsigned int flags

maple tree flags.

Description

If you need to initialise a Maple Tree with special flags (eg, an allocation tree), use this function.

Context

Any context.

void mt_init(struct maple_tree *mt)

Initialise an empty maple tree.

Parameters

struct maple_tree *mt

Maple Tree

Description

An empty Maple Tree.

Context

Any context.

void mt_clear_in_rcu(struct maple_tree *mt)

Switch the tree to non-RCU mode.

Parameters

struct maple_tree *mt

The Maple Tree

void mt_set_in_rcu(struct maple_tree *mt)

Switch the tree to RCU safe mode.

Parameters

struct maple_tree *mt

The Maple Tree

mt_for_each

mt_for_each (__tree, __entry, __index, __max)

Iterate over each entry starting at index until max.

Parameters

__tree

The Maple Tree

__entry

The current entry

__index

The index to start the search from. Subsequently used as iterator.

__max

The maximum limit for index

Description

This iterator skips all entries, which resolve to a NULL pointer, e.g. entries which has been reserved with XA_ZERO_ENTRY.

void *mas_insert(struct ma_state *mas, void *entry)

Internal call to insert a value

Parameters

struct ma_state *mas

The maple state

void *entry

The entry to store

Return

NULL or the contents that already exists at the requested index otherwise. The maple state needs to be checked for error conditions.

int mas_alloc_cyclic(struct ma_state *mas, unsigned long *startp, void *entry, unsigned long range_lo, unsigned long range_hi, unsigned long *next, gfp_t gfp)

Internal call to find somewhere to store an entry

Parameters

struct ma_state *mas

The maple state.

unsigned long *startp

Pointer to ID.

void *entry

The entry to store.

unsigned long range_lo

Lower bound of range to search.

unsigned long range_hi

Upper bound of range to search.

unsigned long *next

Pointer to next ID to allocate.

gfp_t gfp

The GFP_FLAGS to use for allocations.

Return

0 if the allocation succeeded without wrapping, 1 if the allocation succeeded after wrapping, or -EBUSY if there are no free entries.

void *mas_walk(struct ma_state *mas)

Search for mas->index in the tree.

Parameters

struct ma_state *mas

The maple state.

Description

mas->index and mas->last will be set to the range if there is a value. If mas->status is ma_none, reset to ma_start

Return

the entry at the location or NULL.

void __rcu **mte_dead_walk(struct maple_enode **enode, unsigned char offset)

Walk down a dead tree to just before the leaves

Parameters

struct maple_enode **enode

The maple encoded node

unsigned char offset

The starting offset

Note

This can only be used from the RCU callback context.

void mt_free_walk(struct rcu_head *head)

Walk & free a tree in the RCU callback context

Parameters

struct rcu_head *head

The RCU head that’s within the node.

Note

This can only be used from the RCU callback context.

void *mas_store(struct ma_state *mas, void *entry)

Store an entry.

Parameters

struct ma_state *mas

The maple state.

void *entry

The entry to store.

Description

The mas->index and mas->last is used to set the range for the entry.

Note

The mas should have pre-allocated entries to ensure there is memory to store the entry. Please see mas_expected_entries()/mas_destroy() for more details.

Return

the first entry between mas->index and mas->last or NULL.

int mas_store_gfp(struct ma_state *mas, void *entry, gfp_t gfp)

Store a value into the tree.

Parameters

struct ma_state *mas

The maple state

void *entry

The entry to store

gfp_t gfp

The GFP_FLAGS to use for allocations if necessary.

Return

0 on success, -EINVAL on invalid request, -ENOMEM if memory could not be allocated.

void mas_store_prealloc(struct ma_state *mas, void *entry)

Store a value into the tree using memory preallocated in the maple state.

Parameters

struct ma_state *mas

The maple state

void *entry

The entry to store.

int mas_preallocate(struct ma_state *mas, void *entry, gfp_t gfp)

Preallocate enough nodes for a store operation

Parameters

struct ma_state *mas

The maple state

void *entry

The entry that will be stored

gfp_t gfp

The GFP_FLAGS to use for allocations.

Return

0 on success, -ENOMEM if memory could not be allocated.

void *mas_next(struct ma_state *mas, unsigned long max)

Get the next entry.

Parameters

struct ma_state *mas

The maple state

unsigned long max

The maximum index to check.

Description

Returns the next entry after mas->index. Must hold rcu_read_lock or the write lock. Can return the zero entry.

Return

The next entry or NULL

void *mas_next_range(struct ma_state *mas, unsigned long max)

Advance the maple state to the next range

Parameters

struct ma_state *mas

The maple state

unsigned long max

The maximum index to check.

Description

Sets mas->index and mas->last to the range. Must hold rcu_read_lock or the write lock. Can return the zero entry.

Return

The next entry or NULL

void *mt_next(struct maple_tree *mt, unsigned long index, unsigned long max)

get the next value in the maple tree

Parameters

struct maple_tree *mt

The maple tree

unsigned long index

The start index

unsigned long max

The maximum index to check

Description

Takes RCU read lock internally to protect the search, which does not protect the returned pointer after dropping RCU read lock. See also: Maple Tree

Return

The entry higher than index or NULL if nothing is found.

void *mas_prev(struct ma_state *mas, unsigned long min)

Get the previous entry

Parameters

struct ma_state *mas

The maple state

unsigned long min

The minimum value to check.

Description

Must hold rcu_read_lock or the write lock. Will reset mas to ma_start if the status is ma_none. Will stop on not searchable nodes.

Return

the previous value or NULL.

void *mas_prev_range(struct ma_state *mas, unsigned long min)

Advance to the previous range

Parameters

struct ma_state *mas

The maple state

unsigned long min

The minimum value to check.

Description

Sets mas->index and mas->last to the range. Must hold rcu_read_lock or the write lock. Will reset mas to ma_start if the node is ma_none. Will stop on not searchable nodes.

Return

the previous value or NULL.

void *mt_prev(struct maple_tree *mt, unsigned long index, unsigned long min)

get the previous value in the maple tree

Parameters

struct maple_tree *mt

The maple tree

unsigned long index

The start index

unsigned long min

The minimum index to check

Description

Takes RCU read lock internally to protect the search, which does not protect the returned pointer after dropping RCU read lock. See also: Maple Tree

Return

The entry before index or NULL if nothing is found.

void mas_pause(struct ma_state *mas)

Pause a mas_find/mas_for_each to drop the lock.

Parameters

struct ma_state *mas

The maple state to pause

Description

Some users need to pause a walk and drop the lock they’re holding in order to yield to a higher priority thread or carry out an operation on an entry. Those users should call this function before they drop the lock. It resets the mas to be suitable for the next iteration of the loop after the user has reacquired the lock. If most entries found during a walk require you to call mas_pause(), the mt_for_each() iterator may be more appropriate.

bool mas_find_setup(struct ma_state *mas, unsigned long max, void **entry)

Internal function to set up mas_find*().

Parameters

struct ma_state *mas

The maple state

unsigned long max

The maximum index

void **entry

Pointer to the entry

Return

True if entry is the answer, false otherwise.

void *mas_find(struct ma_state *mas, unsigned long max)

On the first call, find the entry at or after mas->index up to max. Otherwise, find the entry after mas->index.

Parameters

struct ma_state *mas

The maple state

unsigned long max

The maximum value to check.

Description

Must hold rcu_read_lock or the write lock. If an entry exists, last and index are updated accordingly. May set mas->status to ma_overflow.

Return

The entry or NULL.

void *mas_find_range(struct ma_state *mas, unsigned long max)

On the first call, find the entry at or after mas->index up to max. Otherwise, advance to the next slot mas->index.

Parameters

struct ma_state *mas

The maple state

unsigned long max

The maximum value to check.

Description

Must hold rcu_read_lock or the write lock. If an entry exists, last and index are updated accordingly. May set mas->status to ma_overflow.

Return

The entry or NULL.

bool mas_find_rev_setup(struct ma_state *mas, unsigned long min, void **entry)

Internal function to set up mas_find_*_rev()

Parameters

struct ma_state *mas

The maple state

unsigned long min

The minimum index

void **entry

Pointer to the entry

Return

True if entry is the answer, false otherwise.

void *mas_find_rev(struct ma_state *mas, unsigned long min)

On the first call, find the first non-null entry at or below mas->index down to min. Otherwise find the first non-null entry below mas->index down to min.

Parameters

struct ma_state *mas

The maple state

unsigned long min

The minimum value to check.

Description

Must hold rcu_read_lock or the write lock. If an entry exists, last and index are updated accordingly. May set mas->status to ma_underflow.

Return

The entry or NULL.

void *mas_find_range_rev(struct ma_state *mas, unsigned long min)

On the first call, find the first non-null entry at or below mas->index down to min. Otherwise advance to the previous slot after mas->index down to min.

Parameters

struct ma_state *mas

The maple state

unsigned long min

The minimum value to check.

Description

Must hold rcu_read_lock or the write lock. If an entry exists, last and index are updated accordingly. May set mas->status to ma_underflow.

Return

The entry or NULL.

void *mas_erase(struct ma_state *mas)

Find the range in which index resides and erase the entire range.

Parameters

struct ma_state *mas

The maple state

Description

Must hold the write lock. Searches for mas->index, sets mas->index and mas->last to the range and erases that range.

Return

the entry that was erased or NULL, mas->index and mas->last are updated.

bool mas_nomem(struct ma_state *mas, gfp_t gfp)

Check if there was an error allocating and do the allocation if necessary If there are allocations, then free them.

Parameters

struct ma_state *mas

The maple state

gfp_t gfp

The GFP_FLAGS to use for allocations

Return

true on allocation, false otherwise.

void *mtree_load(struct maple_tree *mt, unsigned long index)

Load a value stored in a maple tree

Parameters

struct maple_tree *mt

The maple tree

unsigned long index

The index to load

Return

the entry or NULL

int mtree_store_range(struct maple_tree *mt, unsigned long index, unsigned long last, void *entry, gfp_t gfp)

Store an entry at a given range.

Parameters

struct maple_tree *mt

The maple tree

unsigned long index

The start of the range

unsigned long last

The end of the range

void *entry

The entry to store

gfp_t gfp

The GFP_FLAGS to use for allocations

Return

0 on success, -EINVAL on invalid request, -ENOMEM if memory could not be allocated.

int mtree_store(struct maple_tree *mt, unsigned long index, void *entry, gfp_t gfp)

Store an entry at a given index.

Parameters

struct maple_tree *mt

The maple tree

unsigned long index

The index to store the value

void *entry

The entry to store

gfp_t gfp

The GFP_FLAGS to use for allocations

Return

0 on success, -EINVAL on invalid request, -ENOMEM if memory could not be allocated.

int mtree_insert_range(struct maple_tree *mt, unsigned long first, unsigned long last, void *entry, gfp_t gfp)

Insert an entry at a given range if there is no value.

Parameters

struct maple_tree *mt

The maple tree

unsigned long first

The start of the range

unsigned long last

The end of the range

void *entry

The entry to store

gfp_t gfp

The GFP_FLAGS to use for allocations.

Return

0 on success, -EEXISTS if the range is occupied, -EINVAL on invalid request, -ENOMEM if memory could not be allocated.

int mtree_insert(struct maple_tree *mt, unsigned long index, void *entry, gfp_t gfp)

Insert an entry at a given index if there is no value.

Parameters

struct maple_tree *mt

The maple tree

unsigned long index

The index to store the value

void *entry

The entry to store

gfp_t gfp

The GFP_FLAGS to use for allocations.

Return

0 on success, -EEXISTS if the range is occupied, -EINVAL on invalid request, -ENOMEM if memory could not be allocated.

int mtree_alloc_cyclic(struct maple_tree *mt, unsigned long *startp, void *entry, unsigned long range_lo, unsigned long range_hi, unsigned long *next, gfp_t gfp)

Find somewhere to store this entry in the tree.

Parameters

struct maple_tree *mt

The maple tree.

unsigned long *startp

Pointer to ID.

void *entry

The entry to store.

unsigned long range_lo

Lower bound of range to search.

unsigned long range_hi

Upper bound of range to search.

unsigned long *next

Pointer to next ID to allocate.

gfp_t gfp

The GFP_FLAGS to use for allocations.

Description

Finds an empty entry in mt after next, stores the new index into the id pointer, stores the entry at that index, then updates next.

mt must be initialized with the MT_FLAGS_ALLOC_RANGE flag.

Context

Any context. Takes and releases the mt.lock. May sleep if the gfp flags permit.

Return

0 if the allocation succeeded without wrapping, 1 if the allocation succeeded after wrapping, -ENOMEM if memory could not be allocated, -EINVAL if mt cannot be used, or -EBUSY if there are no free entries.

void *mtree_erase(struct maple_tree *mt, unsigned long index)

Find an index and erase the entire range.

Parameters

struct maple_tree *mt

The maple tree

unsigned long index

The index to erase

Description

Erasing is the same as a walk to an entry then a store of a NULL to that ENTIRE range. In fact, it is implemented as such using the advanced API.

Return

The entry stored at the index or NULL

int __mt_dup(struct maple_tree *mt, struct maple_tree *new, gfp_t gfp)

Duplicate an entire maple tree

Parameters

struct maple_tree *mt

The source maple tree

struct maple_tree *new

The new maple tree

gfp_t gfp

The GFP_FLAGS to use for allocations

Description

This function duplicates a maple tree in Depth-First Search (DFS) pre-order traversal. It uses memcpy() to copy nodes in the source tree and allocate new child nodes in non-leaf nodes. The new node is exactly the same as the source node except for all the addresses stored in it. It will be faster than traversing all elements in the source tree and inserting them one by one into the new tree. The user needs to ensure that the attributes of the source tree and the new tree are the same, and the new tree needs to be an empty tree, otherwise -EINVAL will be returned. Note that the user needs to manually lock the source tree and the new tree.

Return

0 on success, -ENOMEM if memory could not be allocated, -EINVAL If the attributes of the two trees are different or the new tree is not an empty tree.

int mtree_dup(struct maple_tree *mt, struct maple_tree *new, gfp_t gfp)

Duplicate an entire maple tree

Parameters

struct maple_tree *mt

The source maple tree

struct maple_tree *new

The new maple tree

gfp_t gfp

The GFP_FLAGS to use for allocations

Description

This function duplicates a maple tree in Depth-First Search (DFS) pre-order traversal. It uses memcpy() to copy nodes in the source tree and allocate new child nodes in non-leaf nodes. The new node is exactly the same as the source node except for all the addresses stored in it. It will be faster than traversing all elements in the source tree and inserting them one by one into the new tree. The user needs to ensure that the attributes of the source tree and the new tree are the same, and the new tree needs to be an empty tree, otherwise -EINVAL will be returned.

Return

0 on success, -ENOMEM if memory could not be allocated, -EINVAL If the attributes of the two trees are different or the new tree is not an empty tree.

void __mt_destroy(struct maple_tree *mt)

Walk and free all nodes of a locked maple tree.

Parameters

struct maple_tree *mt

The maple tree

Note

Does not handle locking.

void mtree_destroy(struct maple_tree *mt)

Destroy a maple tree

Parameters

struct maple_tree *mt

The maple tree

Description

Frees all resources used by the tree. Handles locking.

void *mt_find(struct maple_tree *mt, unsigned long *index, unsigned long max)

Search from the start up until an entry is found.

Parameters

struct maple_tree *mt

The maple tree

unsigned long *index

Pointer which contains the start location of the search

unsigned long max

The maximum value of the search range

Description

Takes RCU read lock internally to protect the search, which does not protect the returned pointer after dropping RCU read lock. See also: Maple Tree

In case that an entry is found index is updated to point to the next possible entry independent whether the found entry is occupying a single index or a range if indices.

Return

The entry at or after the index or NULL

void *mt_find_after(struct maple_tree *mt, unsigned long *index, unsigned long max)

Search from the start up until an entry is found.

Parameters

struct maple_tree *mt

The maple tree

unsigned long *index

Pointer which contains the start location of the search

unsigned long max

The maximum value to check

Description

Same as mt_find() except that it checks index for 0 before searching. If index == 0, the search is aborted. This covers a wrap around of index to 0 in an iterator loop.

Return

The entry at or after the index or NULL