Kernel driver ChipCap2

Supported chips:

Author:

Description

This driver implements support for the Amphenol ChipCap 2, a humidity and temperature chip family. Temperature is measured in milli degrees celsius, relative humidity is expressed as a per cent mille. The measurement ranges are the following:

  • Relative humidity: 0 to 100000 pcm (14-bit resolution)

  • Temperature: -40000 to +125000 m°C (14-bit resolution)

The device communicates with the I2C protocol and uses the I2C address 0x28 by default.

Depending on the hardware configuration, up to two humidity alarms to control minimum and maximum values are provided. Their thresholds and hystersis can be configured via sysfs.

Thresholds and hysteris must be provided as a per cent mille. These values might be truncated to match the 14-bit device resolution (6.1 pcm/LSB)

Known Issues

The driver does not support I2C address and command window length modification.

sysfs-Interface

The following list includes the sysfs attributes that the driver always provides, their permissions and a short description:

Name

Perm

Description

temp1_input:

RO

temperature input

humidity1_input:

RO

humidity input

The following list includes the sysfs attributes that the driver may provide depending on the hardware configuration:

Name

Perm

Description

humidity1_min:

RW

humidity low limit. Measurements under this limit trigger a humidity low alarm

humidity1_max:

RW

humidity high limit. Measurements above this limit trigger a humidity high alarm

humidity1_min_hyst:

RW

humidity low hystersis

humidity1_max_hyst:

RW

humidity high hystersis

humidity1_min_alarm:

RO

humidity low alarm indicator

humidity1_max_alarm:

RO

humidity high alarm indicator